Urbane Concrete

• Make Mixture A & B

• Step 3: Apply a medium layer of Mixture A. Allow 20% of the base to peek through.

• This is a wet-on-wet technique.

• Step 4: While wet, randomly apply Mixture B on top.

• Note: Be sure not to overblend. Allow all colors to show separately.

• Step 5: At 50 sec, Note: If needed, add more of Mixture A to create the desired composition.

• Step 6: Pull tape and with your trowel, soften any soft edges, moving horizontally and vertically.

• If needed: Step 5: While wet, randomly apply Mixture B on top. Lightly blend while allowing blend while allowing both the base and Mixture A to remain separate in some areas. Note: Do not over blend.

• Base paint surface area - Urbane Bronze SW 7408

• Tape desired grid

• Create mixture A: 4 to 1 ratio 4 parts TTG to one part urbane bronze latex paint

• Create Mixture B: 4 to 1 ratio TTG, add black colorant

• Apply a light layer, allow 20 percent of base surface to peek through.

• Speed up through troweling.

• One of the things that differentiate us is the flexibility to change the paint.

• While wet, apply Mixture B

• text underneath for description - randomly on top of first layer allowing some of the colors to remain separate while blending other parts.

• Don’t overblend

• Pull tape now soften the harsh edges